Smart Digital Heated Floor Thermostat NTC Sensor 220V - 240V With LCD Screen

Heated Floor Digital Temperature Control Electric Heating Thermostat

For the control of warm-water(floor) heating systems and direct electric heating systems used in Commercial buildings, Residential buildings, Light industrial buildings...

Technical data

Setting range: 5~35℃

Limitation range: 5~60℃ (factory setting:35℃)
Switching differential: ±0.5℃-10℃

Ambient temperature: -5~50℃

Protective housing: IP20
Housing material: self-extinguishing PC
Floor sensor: rubber-thermoplastic NTC sensor, cable length is 3m

Packaging

Individual white box and outer carton, 64pcs in one carton

Writing Diagram

Attention:

Switch off after finish the advanced setting, the modified function will operate in re-open. Please modify setting carefully.

Sensor failure

EO: Built-in sensor short-circuited or disconnected.

E1: External sensor short-circuited or disconnected.

When shows E0/E1 error, thermostat must be checked till the error is eliminated.

Mounting steps:

1, Release the front cover by inserting a screw drive into bottom crack.

2, Take the backing plate apart according to the following diagram.

3, Mounted the backing plate in the wall socket by screwdriver.

4, After connect wires (see right diagram), the thermostat mount on the backing plate and remounted the cover and frame.

underfloor heating room thermostat

underfloor heating programmable thermostat

Smart Digital Heated Floor Thermostat NTC Sensor 220V - 240V With LCD Screen Images